Electric Guitar Vs Wood (DIY Project Download)

On a solid body guitar the body shape and wood don’t matter much. The density of the wood controls its sound, and its ability to resonate and reflect or absorb the vibrations caused by the string vibration, or the column of air, or the strike of the membrane. Also, woods of the same species cut from different trees (or grown in different regions) will sound slightly different, and have different weights, different densities, and so on. So the sonic variables exist not only between woods, but, in subtler degrees, between different guitars made from the same wood which is part of the magic in searching for your dream guitar amid ten of the same model hanging on the guitar store wall. Which Electric Guitars Do We Rate As The Best? Manufacturers and guitar players suggest that using a particular shape, or a specific wood material – be it alder, poplar, ash, basswood etc – will produce significant and specific tone variations.

electric guitar vs wood 2The wood that goes into making a guitar, whether it’s an acoustic or electric, is a very important thing to consider. The major features of guitars that are made from wood are the body, which is the largest part of the guitar, where the sound emanates from, and the neck and fingerboard, where the frets are located. Wood is not going to dramatically change the sound of your electric guitar. Australian Student claims different tonewood in electric guitars make no difference to the tone. Whilst in an acoustic guitar, the effects of different woods on tone is quite apparent, there has always been a section of the guitar world that has been sceptical of how much effect it has on a solid body electric guitar. It also confirms different strings do have a different sound, because strings made of different metals or alloys will have different magnetic properties.

The Impact of wood choice in an electric guitar, a scientific look at tone wood. Whether or not wood has an effect on tone, I still believe using quality, highly-resonant wood is important in making a quality guitar. Your guide to all the tone woods and timbers used in the construction of electric guitars: Alder, Ash, Basswood, Mahogany and Maple. Having said that, it can be used for laminate tops, but it isn’t strong or hard enough to build necks or fingerboards with. If you’re a tone junkie, you need to be sitting down for this:-)So this college degree student and guitar player did some thorough tests and came to the conclusion that the body wood in an Electric guitar has no effect on the tone or sustain the guitar produces. He used various guitar shapes and bodies but with identical pickups, same pickup to string gap, same strings and same set ups, recorded the results, comparing frequencies etc and found that the notes were indistinguishable from guitar to guitar.

Types Of Guitar Wood: Which Ones Sound The Best?

electric guitar vs wood 3Because modern pickups aren’t affected by the body wood a guitar is constructed out of. The hardness or softness of the pick you use does change how an electric guitar sounds because it affects the vibration of the strings as you pluck or strum. Wood is the majority of tone on a electric guitar or any guitar! The steel-string acoustic guitar is a modern form of guitar that descends from the classical guitar, but is strung with steel strings for a brighter, louder sound. The archtop guitar incorporates a top, either carved out of solid wood or heat-pressed using laminations, that is arched like instruments in the violin family, usually with an f-hole rather than a round sound hole. THE SOUND OF THE ELECTRIC GUITAR WOOD. A neck resonates at a certain frequency, the one of the wood (or sum of the woods) is made of. Each neck, cut from the same tree or even from the same blank will produce a different tone. I recently tested a guitar that I know was made from laminated wood (supposedly very bad from what I’ve read) against a guitar made of solid mahogany. Fretboard woods will contribute to your guitar’s tone, feel and appearance. But what’s the difference? We look at Ebony, Maple and Rosewood.

The Impact Of Wood Choice In An Electric Guitar, A Scientific Look At Tone Wood

People who don’t play an instrument often believe an electric guitar or bass is basically just a board with strings on it. While that might be true from a certain point of view, musicians know that instruments come alive in their hands. How do you tell if a guitar is made from solid wood or laminate? The woods used for constructing the body of an electric guitar include maple, mahogany, alder, ash, poplar and basswood. If you don’t already have your own electric or acoustic guitar, don’t fret! The style of music played on electric and acoustic guitars is very different acoustic guitars are associated with mellow music like folk and country, while electric guitars are used for metal and rock music. When the strings of an acoustic guitar vibrate, they also vibrate the soundboard, which is a wooden piece on the front of the guitar that magnifies the sound.

Not at all like a Strat (or any electric guitar) should sound. The tone on any pickup is muddy, with short sustain, and no definition. If you have a long plank of wood then it would be easier to build the body of the guitar. This is an unconventional way of building an electric or bass guitar. i have built a total of 14 including this one. Instead of giving you my opinion on solid wood vs laminate guitars, here are some wood facts that should guide you to your own decision when buying a guitar. The biggest sonic difference between a laminate and a solid is that laminates tend not to resonate sound as well. When you’re looking over the specs of a Fender electric guitar or bass, one of the first things you’ll see listed is the kind of wood the body is made of. Two mainstay woods for Fender have been alder and ash. The mere mention of Korina wood in the same breath with a guitar makes many guitarists and collectors drool.