Guitar Neck Wood Types (DIY Project Download)

Also, woods of the same species cut from different trees (or grown in different regions) will sound slightly different, and have different weights, different densities, and so on. Whether in the form of a solid, one-piece neck with integral fretboard, or a neck with an added fretboard of a second type of wood (usually rosewood), maple is easily the most common type of neck wood used in solidbody guitars. There are many different types of guitar wood out there, with each one differing in weight, density, and appearance, and are responsible for a guitar’s sound. The major features of guitars that are made from wood are the body, which is the largest part of the guitar, where the sound emanates from, and the neck and fingerboard, where the frets are located. Occasionally we find some of this wood quartersawn and offer it in neck form. This is a great way to get a darker look to your neck without a finish doing it for you! Tone-O-Meter YES NO Used for neck backs X Used for fretboards X Unless made as a one-piece neck Finish required X Used for bodies X Bocote (Cordia elaeagnoiders):. A true Rosewood species and gorgeous to behold. Unfortunately this extremely oily wood is difficult to glue.

guitar neck wood types 2Maple is a very hard type of wood with good tonal qualities and good sustain. Guitar necks are traditionally made from maple, because the material can highlight and amplify the wood in the body. The neck wood strongly influences the tone of the guitar, because it occupies perhaps the most important part of the body: the center. Guitar neck wood is ultimately important to ensure your guitar does not develop severe problems as it ages.

Although there are masses of varying types of woods used as guitar fretboards you are most likely going to find one of three main species on the majority of guitars: Ebony, Maple and Rosewood. OK, my fellow guitar gurus this month we are all about the wood. I was just sent an email from a customer asking what wood his neck should be made out of, and how this would affect the tone.

Guitar Wood: A Guide To The Tonewoods Used In Guitar Building

Neck woods: Carved neck, Greven Guitars LMI offers a broad selection of materials for instrument necks. Each species has been selected over time for neck construction because of its strength, stability, and machineability. Bodies + Necks + Wood Electric Guitar at Stewart-MacDonald – your source for guitar parts, tools, and supplies. Wood Type Alder (2). Sipo Mahogany Neck Blank for Electric or Archtop Guitar. Materials + Supplies Bodies + Necks + Wood at, your 1 source for luthier tools and supplies, guitar parts, and instrument hardware. No truss rod and I don’t know what specific type of Ash. It has an Ebony fingerboard, but is fretted, so I won’t know until I get the body whether I’ll have to get another fretboard, or be able to adapt that one. Swamp Ash tone wood was used on Fender guitars until the mid 50s when Alder was chosen as its successor. Although there are four varieties of the species, and both Northern and Southern varieties exist, it is mostly the Tilia Americana of the northern Great Lakes states that is used for guitar construction. Because of this, Hard Maple tone wood is more commonly found in neck than solid body construction because of its undesirable weight. Where Gibson electrics are concerned, the necks used to be made of Honduran mahogany. Gibson doesn’t use that species of wood anymore and hasn’t for a long time now.

Which Guitar Fretboard Wood Is Best? Maple, Ebony Or Rosewood?

From guide: Guitar Wood Types and Tones (Body, Body top, Neck, Fretboard) Chapter 3. Guitar Neck Woods Neck woods: Maple: The most common electric guitar neck wood, Maple has a uniform grain, it’s strong. The tonewood selected for a solid body guitar neck is an important factor in the way it sounds. Each tonewood species and cut has its own unique characters. On acoustic guitars the neck extends from the headstock to the heel joint at the top of the guitar body. The second group of wood species referred to as mahogany are members of the Khaya group and depending on availability, are also used in neck construction. Entertainment, as well as Cheap and more! Online Get Best Guitar Neck Wood Types You Need from, A Leading Online Retailer!

You ve finally mastered learning to play the guitar, but it still doesn’t sound perfect. Now it’s time to take a look at the wood for your guitar. But does the type of wood used to build the body or the neck or any other part of a solid body electric guitar have any significant effect on the way the guitar sounds?. Some basic knowledge about the different wood types, neck and body profiles, pickups etc will help you in making the best choice. To take the guitar up to a pro level, replace the pickups with some Fender Custom Shop 69s or Fat 50s. Learn the difference in the types of wood used to create guitar bodies and necks. See more about Smith Wesson, Rave and Woods. But we can pare down the neck issue to three important factors: the wood (type and number of pieces), the neck joint (how it connects to the guitar s body), and the profile (the width, thickness and shape).