Also, woods of the same species cut from different trees (or grown in different regions) will sound slightly different, and have different weights, different densities, and so on. What types of woods are used for guitars? American Tulipwood (Poplar), Wenge, Phoenix, Paulownia, and Agathis are other woods often used in guitar bodies, each with its own specific tonal qualities. The sonic properties of wood vary dramatically between species, weight and density. Generally speaking, heavier woods sustain well and have a bright and articulate sound, which are all good attributes for a bass guitar.
There are many different types of guitar wood out there, with each one differing in weight, density, and appearance, and are responsible for a guitar’s sound. Poplar is a great choice for tone, and if selected properly can also look amazing. While there will invariably be guitars produced from any species of lumber that sound less inspiring than others made with the same lumber, considering the plethora of factors contributing to the final voice, singling out the wood as being the tone killer is a bit of a stretch. The cheaper, which is mass produced by less skilled labor, consists of the same species of wood, but from a pile that came out of a container, in the order it was stacked.
Your guide to all the tone woods and timbers used in the construction of electric guitars: Alder, Ash, Basswood, Mahogany and Maple. There are two kinds of Ash Tone Wood: Northern Hard Ash and Southern Soft Ash more commonly known as Swamp Ash. Poplar: one of the softer hardwoods, nicely resonant with a meaty tone. Many guitar manufacturers as a substitute for alder are using this wood, as it is quite similar in tone. Basswood is not a favored tonewood but Poplar sounds quite good.
Types Of Guitar Wood: Which Ones Sound The Best?
From guide: Guitar Wood Types and Tones Alder Guitar BodyAlder is light in weight with soft tight pores like Basswood. Fender, BTW, Fender formerly used even as cheap wood as poplar, covered with ash or alder. Most common varieties are Northern Hard Ash which is very heavy and has great sustain, and a very bright tone popular with the chickin’ pickin’ crowd or anyone with a really dark amplifier. Poplar is a great tone wood that is overlooked by many builders because of its lower cost. Hi I went to Home Depot to buy wood but all they had was something called poplar. i took it. does anyone know if poplar is ok for the neck and/or body and how to purchase maple or other standard guitar wood?. Even different pieces of wood from the same species can be rather different. One way to explain the different tone qualities of different types of wood is to rate them in terms of hardness. Poplar is a closed grain wood that accepts finish well. Paulownia wood for guitar bodies featured as a current and future building resource. We have not seen any increase in dents or dings compared to other wood types that we carry and the material itself is not subject to warping or cracking compared to other wood types, even in bad weather conditions. My question: Why doesn’t RockAudio carry BASSWOOD or POPLAR bodies?
Electric Guitar Tone Wood Guide
If you are making your own guitar neck, the best wood is the wood that costs nothing, I can’t pass by a skip (dumpster) without looking for old furniture. The wood used to build acoustic guitar backs and sides must be resonant and be able to reflect sound. The tonewood you choose for an acoustic guitar has a bigger influence on sound than the wood for an electric guitar, but electric guitars are affected by the different types of woods as well. Poplar guitars are good choices for players favoring a clean sound with a snappy disposition. Strat bodies are usually made of ash, alder or poplar and Les Paul bodies are mostly made of mahogany with a maple top. There is no specific combination of wood types that make a guitar more or less appropriate for rock/metal music. FWIW, Fender made most bodies out of poplar back in the 70’s. I’m not sure which (if any) of these have been used to make guitars, though apparently some species have been used to make the backs of violas so they have potential as tonewoods.
Tonewoods Wood, Tone Woods, Guitar Tonewoods, Wood Types. Guitar Wood Types & Tones FAQ by Frank Falbo for jemsite.com Discuss on the forum here last updated 3/8/2004. A clearer, darker Basswood should produce more sound, while the yellowish lower grade seems to have more of the undesirable tonal qualities of Poplar. Poplar: one of the softer hardwoods, nicely resonant with a meaty tone. Many guitar manufacturers as a substitute for alder are using this wood, as it is quite similar in tone. Below you will get an overview of our wood types and their characteristics. We are happy to advise you on the choice of wood. We use a very special poplar quality in our guitars. Although it is considered rather low quality wood, we have an excelent quality with outstanding sound characteristics. Just wondering how good poplar guitar necks are, as well as mando, bass, and other types of necks. I found that this wood is like dirt cheap, (maybe even cheaper than dirt per board foot vs.