I’ve seen to bypass them is to cut the wire back short on the sensor pair (6-12 ) then put the sensor face to face with the emitter and tape them together. I have put the sensors next to each other, no luck. I just want to bypass them, and beleive there has to be a way to just jumper them out. To connect your safety sensors correctly, first look at the connectors to determine whether has quick connect plug-in terminals or screw terminals on the motor head.
How can I bypass my Genie Garage Door Opener’s light sensor electronically? They call it Safe-T Beam, I call it a pain in the arse. I know I can position the two sensors directly against each other, but I was hoping to find an electronic way of bypassing the sensors. You can always override the eye sensors by holding down the wall garage door opener button. Atleast you will be able to close the door when coming home and not having to do it manually. But if it is a sensor problem wouldn’t the door go back up at anytime I release the override wall controller? If it is a door sensor problem the main lights will blink 10 times.
How Can I Bypass My Garage Door Opener’s Light Sensor?