My question concerns putting a stove inside the old fireplace. My stove dealer tells me I have to buy all this pipe and fittings to install the new stove. There are two types of wood stoves that can be connected to fireplace flues: freestanding stoves and fireplace inserts. These stoves can be vented into chimneys constructed of masonry or a factory-built metal system that’s been designed, tested and listed for use with wood burning appliances; they can also connect to an existing fireplace chimney, if the height and position of the stove’s flue collar permits it. I don’t want to do to the expense of installing a new fireplace insert and liner. I’d like to just put in a wood burning stove, close up the chimney bottom and use the chimney for the vent pipe.
Fitting a wood burner in existing fireplace question. 38 posts & 24 voices Started 4 years ago by granny_ring Latest reply from williamlaurence-spam. Tags:. When you are installing a wood stove or a fireplace, there are some things that you should consider, whether you choose to do it yourself (subject to local building regulations) or you outsource the entire job. Fireplace inserts are a special type of wood stove and are specifically designed to fit into the firebox (where logs normally go) of an existing fireplace and to use the fireplace flue to vent smoke and other by-products of combustion.
Opening up a fireplace, an old fireplace, for a wood burning stove is usually a straight forward part of a wood burning stove installation. Homes with existing fireplaces or stoves should already have a chimney structure in place. When installing a new wood stove or wood stove insert, utilizing the existing chimney is usually much more cost effective than constructing a new chimney. If you want to reduce your heating bills and improve the look of your old fireplace, installing a modern wood burning appliance is the way to go.
Fitting A Wood Burner In Existing Fireplace Question. « Singletrack Forum
Before you buy a woodstove or haul that old stove out of grandpa’s barn to hook up in your living room, inform yourself!. Ten characteristics of successful stove and fireplace systems This fact sheet by a Canadian nonprofit promoting safe, efficient domestic wood heating defines perfection in a good wood heating system (including the need for an informed operator) to help homeowners judge their own. Our living room project: use the old coal fireplace chimney to install a wood stove. I have a fireplace made of brick. I also have a cast iron wood burning pot belly style stove. I would like to put the stove into the fireplace insert. Earn financial incentives when you switch your old wood stove to a cleaner, more efficient stove. Ben Franklin Fireplace 790 Louise Street, Reno, Nevada 89502; (775) 236-7347. Information about installing Wood, Pellet, and Gas Stoves in Washoe County. Remove old fireplace and install wood burner stove. Excellent. We’d planned on removing all of the brickwork that had been installed around the old gas fireplace and wanted to open up the chimney breast back to the original Edwardian opening.
Opening Up A Fireplace For The Installation Of A Wood Burning Stove
The state of Idaho offers taxpayers who buy new wood stoves, pellet stoves, or natural gas or propane heating units for their residences a tax deductionExit to replace old, uncertified wood stoves. Laguna Beach CA, city ordinancesExit – Any major remodel to a single-family residence requires retrofit of existing wood-burning fireplaces to comply with U.S. EPA Phase II emission limits by using a qualified retrofit insert, converting the existing wood-burning fireplace to gas-only use or other approved device.