Although not as strong as a dovetailed joint, a well-made lock-rabbet joint will hold up fine unless the drawer takes heavy, regular pounding. How to use the tablesaw to make a simple, sturdy joint. How to make a rabbet-and-dado joint using a table saw. If so, a locking joint that combines a rabbet with a dado is the perfect solution. Drawer boxes are a great example of a need for high strength, because they’re stressed twice with each use.
When building casework, drawers, shelving or box joinery there are four basic rabbet joints to learn, and they are very easy to cut on your table saw. Then, lock the parts with brads to strengthen the glue bond and form a mechanical connection. A lock-rabbet joint, while not as strong as a dovetail joint, is still a strong, attractive and relatively easy joint to make. I want to use the table saw, since my my box joint blade does both 1/4 and 3/8 cuts.
My customers like the look of the exposed 9-plys and lock joints, and the painters and customers both love the fact that the drawer boxes need no finishing. Then, also keeping the piece with the dado grooves facing down to the table saw top, cut the length-wise grooves for the drawer bottom. A good joinery option to have in our arsenal is called a lock joint, which is commonly used on projects that include drawers. This joint essentially combines a table saw dado on one piece with a rabbet on the other, and the result is a joint that is simple to create and assemble, providing sufficient strength to withstand significant abuse over the life of the piece. Rabbets on the Table Saw. A rabbet is really nothing more than a notch that’s cut into the edge or the end of a board, and they’re used all the time in projects for things like adding a back to the back of a cabinet, or for making drawers.
Using Your Table Saw To Cut The Four Basic Rabbet Casework Joints
Is a drawer lock bit set up for 5/8 Baltic drawers a good option? You can do it on the router table with standard bits or do it on the table saw. Since this is so similar to the joint one gets with the ‘drawer lock’ bit, I’m reluctant to purchase one. For those times that I’ve used the drawer lock type joinery for drawers and boxes, I just cut them using the table saw. Here I demonstrate how I do lock joinery on the table saw. Love this joint for fast and easy drawer fronts that will withstand a lot of abuse. Step-by-step color photographs illustrate cutting dadoes, rabbets, finger joints, tenons, tongue-and-groove joints, dovetails, lock joints for drawer fronts, and compound and simple miter joints with spline reinforcement. These 6 joints can be used in many projects or combined for interesting designs. They are used in fine woodworking, and also in production (especially drawers). Locking joints can also be made with a router or table saw, creating interlocking pieces that will hold together in various ways.