Transform your dull wood floor into a showpiece with only a few tools. Fortunately, many water-based products will adhere to just about any existing finish (except a wax finish of some kind), so they’re the best choice if you’re unsure of what your old finish is. You should also be careful of areas that have been exposed to furniture polish. Find out which finish is the best for you project, water-based or oil based polyurethane. They’ll slightly accent the character of your wood without giving it the amber tint of an oil-based poly. The Bona 32 oz. High-Gloss Hardwood Floor Polish was specially designed for wood floors, including factory pre-finished floors. It adds a high-gloss protective layer.
It’s similar to using a hardwood floor polish, but quicker & easier. NEVER EVER use a water based poly for hardwood floor finishes. Minwax hardwood floor finishing products add color, decorative style and beauty to wood. Available as oil based or water based stain formulations.
Follow our easy steps on how to clean hardwood floors. Acrylic and water-based waxes can turn floors white, furniture wax creates a slick surface and one-step waxes (despite the compelling pitches: They clean! They remove old wax! They lay down new wax!) can trap dirt. Bona’s industry-leading waterborne finishes and sealers have always been VOC-compliant and healthier for people and the environment than most other finishes. Bona Deep Clean Polish. Designed specifically for the unique demands of heavy-traffic commercial and residential hardwood floors, Bona Traffic’s advanced formula provides the ultimate in durability, outperforming any finish in the industry – moisture cure, solvent-based, oil-modified or other waterborne finishes.
Using Bona Refresher As A Floor Polish Instead Of Using Floor Wax: How To Make Hardwood Floors Shine Without Damaging Them!
Once better reserved for cupboard doors or other vertical surfaces, water-based polys provide a hard, glowing, long-lasting surface for hardwood floors, combined with lower vapor emission and easier application methods than needed for oil finishes. How to Polish Wooden Floors: To add attraction, warmth and classiness to a home the Wooden Flooring is the best one. In the market, two types of varnish available one is oil base urethane varnish and other is water based urethane varnish. Water Based Hardwood Flooring Finishes. If I was given a choice in using oil or water based finishes, I would choose the friendlier water based urethanes. Water-base silicone polishes can be used on all floors EXCEPT unsealed wood, cork, or linoleum. This is the only type of polish suitable for urethane-finished surfaces. Oil-based polyurethane accents hardwood with a golden shade, and this warm tone darkens slowly with time. Floors with oil and water-based polyurethane finishes sometimes require a full sanding and re-application of finish to repair damage and wear. The person we are likely going to hire uses Dura Seal and Long Kote for oil based products and Bona for water based. And maybe if my idea on mixing the two even worked, you would hear of it more often, so I’m not that hopeful, but wanted to ask anyway.
How To Clean Hardwood Floors 101
The plant-based, zero-VOC oil finish being used on this yellow pine floor really makes the natural wood grain pop. You can use a water-based polyurethane over an oil-based poly as long as the old finish has completely cured (two to three weeks). Varnish, Penetrating Stain/Wax, Wax, What Finish, What wood floor product? Water-based urethane is a water-borne urethane with a blend of synthetic resins, plasticizers and other film forming ingredients that produces a durable surface that is moisture-resistant. Since refinishing wood floors involves multiple coats of polyurethane, this means that the total time of your refinishing job is longer with the oil-based. When we refinished our wood stairs, I decided water-based polyurethane was a must because otherwise we couldn’t get to any of our bedrooms or full baths and would need to sleep somewhere else for a few nights. But it almost always turns out that the other company was completely thorough and aboveboard; they simply had applied a water-based finish without explaining to the customer how it would look.